Product introduction：

Simple Introduction:

This machine is used extensively in Dermatological, ENT, gynecological, general surgery etc.

MEDICAL CO2  LASER  DEVICE YYJG-1C

The CO2 MEDICAL LASER DEVICE YYJG-1C is a new type of therapeutic equipment adopting low wavelength CO2 laser. The system is characterized by high speed, effective coagulation, minimal bleeding in operation,and minimal radiation therapy of affected tissues of patients, Used or vaporizing malignant tumours,it reduces the residual tumour cells as well as the rate of metastasis employed for radiation therapy, it has the effects of dilating blood vessels, alleviating pain, relieving inflammation, speeding up metabolism, promoting tissues growth, and accelerating healing of wounds. The equipment is featured by reasonable construction,stable performance, and sefety and reliability,accurate operation is accomplished by the cooperation of red He-Ne laser asaiming and guiding light, The machine is well suited for usage by different levels of hospitals and medical centers.

Technical data :

     1.Wavelength of laser output:10.6um

     2.Mode of laser output:low wavelength

     3.Power output of laser tube:No less than 35W, continuously adjustable

     4.Glow voltage of laser tube:No less than 28kv

     5.Rated working current; No greater than 20mA

     6.The flexibility of the light guide joints permits three axial movements of Z, Y and Z, The output light beam travels in fashion with loss of light no greater than 20%.

     7.Mechanical ratation; the angle of depression of the platform is no less than 25 degree,the angle of elevation less than 25,and its horizontally rataing angle no less than +/-25`-150`.

     8.Overcurrent protection: automatically cuting off power if the light tube does not glow while the primary of the high voltage transformer reaches 225V.

     9.Overcurrent protective device: The machine cut off power automatically if the working current of the laser tube reaches 25mA

     10.Water supply cut-off protective: The machine cut off power supply automatically when the cooling water system of the laser tube runs out of water.

     11.The voltage of the laser power output on empty load is greater than 28kV

     12.The system is attached with He-Ne indicating light

     13.Working conditions:

         Roomtemperature: 5` to 40`

         Relative humidity:<80%

         Power supply:AC220V +/- 10%50Hz

         Power capacity:less than 1000VA

     14.External dimensions:1500mmx540mmx400mm

     15.Weight of the unit:62kg